Phone 9913372218

Foam Guard SD is water dilutable Silicone Emulsion containing 15% active ingredients. It is manufactured with specially selected ingredients. It has excellent emulsion stability even at the temperature beyond 100°C. Only on occasional stirring is required for even diluted emulsions to remain dispersed. Foam Guard SD is a special developed Silicone Antifoam suitable for high temperature processing such as High Temperature Jet Dyeing.

Active Antifoam
Silicone Emulsion
Type of Emulsion
Non iconic


Only 5 to 10 Gms of Foam Guard S.D is sufficient for 1 Metric ton of foamer in most cases. How ever, 60 Gms of Foam Guard S.D per metric ton of foamer will determine the working concentration. The result at the above concentration will give the idea whether to increase or decrease the quantity of the Foam Guard S.D.

Foam Guard SD may be added directly to the foamer in any concentration with agitation in cold aqueous systems for easy dispersion. However, for hot systems prediluted Foam Guard SD is recommended.


  • Shake or Stir the container of Foam Guard SD before removing from containers.
  • Required quantity of Foam Guard SD must be diluted with 10 volume of water at room temperature by slowly adding water to it with continuous stirring.
  • For best results the above diluted antifoam should be consumed within eight hours after dilution. Diluted antifoam must be frequently stirred for use after periods.
  • For textile finishing and Dyeing etc. process, diluted antifoam should be added last i.e. after all the ingredients are mixed.